by moregrip » Tue Apr 19, 2022 6:54 pm
cut the channel on my benchtop mill (initial cut)
the setup I used:
touched up/finished channel
Finished assembly, mostly stock internal Glock parts. Non Glock parts are ghost springs, rook safety plunger and ghost 3.5lb connector.
On the hunt for a better magwell.
by moregrip » Sat Apr 23, 2022 9:24 am
Ancient Order wrote: ↑Thu Apr 21, 2022 8:57 pmmoregrip wrote: ↑Wed Apr 20, 2022 8:09 pmHawkeye wrote: ↑Wed Apr 20, 2022 9:49 am You got it going on my friend!!! This is the set up I tried to do but my benchtop mill is too small. If you don't mind telling, what mill, and x-y vise did you use? Your build looks like it turned out perfect, very nice work!!! this is the exact one I use for these types of projects (I find it to be rather handy) https://www.ebay.com/itm/233659852653 I bought mine when they were $1200 (prices have gone up since then) https://www.grizzly.com/products/grizzl ... tand/g0704 First I gotta buy Hosco fret cutters. Then a Dremel press. And a gazillion other gadgets and thingamabobs. Now this??? WTF. ehhh, not needed IMO, but if you have one......
by moregrip » Wed Apr 27, 2022 7:19 pm
I have the PF45 file from FarrowTech, and all the others if someone wants them to print a sweet PF45 magwell.....