Freedom wolf part two

I've been moving right along with this build so let's go to all the mods I have done on this build.

1) Thought I might try my hand at HD borders.

2) I reshaped the magwell filling in the rear to smooth out the looks. I glued in on then used some JB Weld for shaping. On the front of the magwell I did do a radius to get rid of that square look and feel but I could not take a lot of stock off because of the way it fits. (I doubt if I ever use one on a LW again)

3) I did a large undercut here. Along with the radius on the magwell my hand fits perfect. I have a large hand with short fat fingers, so it is hard for me to hold a compact frame with a magwell unless it has a radius for my little finger.

4) I did an undercut here and made it thin for a cut out (more info later)

5) Another undercut with a radius that fits a finger just in case you want to use the secondhand grip in this area.

6) This really worked out, the undercut here leads all the way into the trigger. I find without this cut on the LW, your trigger finger feels uncomfortable. For me it feels like there is a hump just before your finger inters the trigger. With this cut to match your finger it really feels good and more of a natural grip on the frame.

Those that have watched GOT know what wolf this is from. My plan here is to take the pattern in the wolf and continue the pattern into the stippling down and around the back strap meeting the wolf on the other side as if the wolf in coming out of the grip. The rest of the stippling will be just a random pattern that does not take away from the wolf. I call this one "The Young Wolf"

Here is what I plan for a cut out in the trigger guard.

My plan is to cut out a wolf paw print into the trigger guard.

If anyone wants to know how I do this stuff just ask, I can reply on the forum or talk about it on Fireside Chat.

All you need is a Dremel and sandpaper.